Friday, April 19, 2024

Rosealine Necklace/Bracelet Pattern




You can make this pattern as a necklace or a bracelet. You can even make both.
If you prefer less of a curve for the bracelet at step #1b, pick up 2A, 1B, 2A. Then balance that in step #3 and future steps.

Bead Store

A = Toho Gold Lustre Rose 11° SEED bead, 50* beads
B = 4mm Fire-polished Rosealine Crystals, 3* beads

*Beads counts are per repeat (Unit), each Unit is about 3/4 inch.

Nymo D, C-Lon Thread or Fireline (4 or 6 pound), #11 or #12 beading needle

This Pattern is Free here on my Blog.
To Purchase a Downloadable PDF for $1.49 Click HERE 

Start by waxing and stretching your thread. Tie in a “stopper” bead, leaving about a 8-10” tail and begin at step #1.

1. a) Pick up 1A, clasp, 1A.

b) Pick up 2A, 1B, 3A go with thread up through the 2 A beads added at (a) or the 8th and 9th A beads step #4, forward through 2 A and the B beads just added.

2. Pick up 7A, go with thread down through the 4th B bead and the 1st A bead (0f the 3A), step #1b.


3. 
Pick up 4A, 1B, 4A, go with thread up through the 1st A bead, step #2, the B bead, step #1b, and left to right through the 7th, 6th, 5th and 4th A beads, step #2.


4.
 Pick up 11A, 1B, 2A, go with thread down through the 5th and 4th A beads, step #2, and forward through the 1st and 2nd A beads just added in this step.


5.
Pick up 4A, go with thread forward through the 1st, 2nd and 3rd A beads, step #4.


6.
Pick up 3A, go with thread up through the 2nd and 1st A beads, step #5 and forward through the 3rd and 4th A beads, step #4.


7.
Pick up 5A, go with thread up through the 2nd and 1st A beads, step #6 and forward through the 4th and 5th A beads, step #4.


8.
Pick up 3A, go with thread up through the 2nd and 1st A beads, step #7 and forward through the 5th, 6th and 7th A beads, step #4.


9.
Pick up 2A, go with thread up through the 2nd and 1st A beads, step #8 and forward through the 6th, 7th, 8th and 9th A beads, step #4.


10.
Continue by repeating steps #1b through #9 until you reach the lenght that you would like.


11.
 a) Pick up 2A, 1B, 3A, go with thread up through the 8th and 9th A beads added at step #4 and forward through the 1st and 2nd A beads and down through the B bead added in this step.

b) Pick up 4A, clasp, 3A, go with thread down through the B bead added at (a)and the 1st A bead (of the 3A) added at (a).

c) Pick up 4A, 1B, 4A go with thread up through the 1st A bead added at (b) and the b bead added at (a). Continue with working thread around through all the beads added at (b) for strength.


Rosealine Necklace/Bracelet Pattern, B0270
http://www.sandrahalpenny.com
Sandra D. Halpenny © 2014 - 2024 All rights reserved
Canadian Intellectual Property Office
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows, etc. No mass production of this design is permitted without permission from the author.





Tuesday, January 16, 2024

Snowflake #189 Ornament Pattern


This Pattern is Free here on my Blog.
To Purchase a Downloadable PDF for $1.49
Click HERE

Bead Store - 2” Snowflake
A = Miyuki 11° SEED bead, 300 beads
B = Miyuki 15° SEED bead, 36 beads
D = Miyuki 11° DELICA bead, 280 Delica’s

Nymo D Thread or Fireline (6 lb or 8 lb*)

*I used 8 lb for this pattern

#11 or #12 beading needle

Start by waxing and stretching your thread. Use Fireline*, Nymo D or C-Lon and an #11 or #12 beading needle. Tie in a “stopper” bead, leaving about a 8-10” tail and begin at R1. *I have recently started using Fireline® fishing line, too. I like 4lb and 6lb Crystal for bead weaving.



1. Pick up 12A, make a ring by going with thread through the 1st A bead just added. Continue with working thread around through all 12 beads again, plus go through the 1st bead one more time.

 

2. a) Pick up 3A, go with thread forward through 1 A bead and skipping over 1 A bead in step #1.

b) Repeat (a) around 5 more times

c) Continue with working thread forward through the 1st and 2nd beads added in the first repeat of (a) this Round.

*Please Note: The peyote sides are marked with S1, S2, S3 and S4

3. Pick up 9D, 1A, 3D, 1A, 3D, 1A, 9D, go with thread right to left through the 2nd A bead, step #2 as shown and up through the 1st D bead just added in this step.

4. Add with peyote, 4 D beads up left side (S1), at the 3 corners add 2A beads, add with peyote top left and top right peyote 1 D beads (S2 and S3), and then add 4 D beads down the right side (S4) as shown. Continue with thread right to left through the 2nd A bead, step #2 as shown and up through the 1st D bead step #3 and the 1st D bead just added in this step.

 5. Add with peyote, 4 D beads up left side (S1), at the 3 corners add 1A bead, at top left and top right peyote 2 D beads (S2 and S3), and then add 4 D beads down the right side (S4) as shown. Continue with thread right to left through the 2nd A bead, step #2 as shown and up through the 1st D bead step #3, the 1st D bead, step #4 and the 1st D bead just added in this step.

6.Add with peyote, 1A and then 2B beads up left side (S1), nothing is added at corners, instead go with working thread through 4 beads as shown, add with peyote 1 B bead at the top left (S2 ) at the very top add 5A beads, add with peyote 1 B bead at the top right (S3), and then add 2 B and 1 A beads down the right side (S4) as shown. Continue with thread down through the 3 rows of peyote and right to left through the 2nd A bead, step #2 as shown. Weave through steps #2 and #1 beads as shown coming out with thread right through left through the next 2nd A bead, step #2.

 7. Repeat steps #3 through #5.


8. Add with peyote, 1A and then 2B beads up left side (S1), nothing is added at corners, instead go with working thread through 4 beads as shown, add with peyote 1 B bead at the top left (S2 ) at the very top add 5A beads, add with peyote 1 B bead at the top right (S3), and then add 2 B beads down the right side (S4) as shown. Continue with working thread down through the 1st A bead added in step #6 and then down through the 3 rows of peyote and right to left through the 2nd A bead, step #2 as shown. Weave through steps #2 and #1 beads as shown coming out with thread right to left through left through the next 2nd A bead, step #2.

9. Repeat steps #7 and #8 3 times..

10. Repeat steps #3 through #5. After finishing step #5 repeat, continue with working thread up through the last A bead added in the first step #6 repeat as shown.

11. Add with peyote, 2B beads up left side (S1), nothing is added at corners, instead go with working thread through 4 beads as shown, add with peyote 1 B bead at the top left (S2 ) at the very top add 5A beads, add with peyote 1 B bead at the top right (S3), and then add 2 B beads down the right side (S4) as shown. Continue with working thread down through the 1st A bead added in step #6 repeat as shown and then down through the 3 rows of peyote and left to right through the 2nd A bead, step #2. Weave your working thread into the snowflake and end.

Finishing

After the snowflake is complete, you can stiffen it with SC Johnson Pledge Future Shine. It is a great stiffener; it stays clear even on the crystals. Test it first if you use seed beads with dyed colors to make sure the floor finish doesn’t remove the colors.

Pour enough of the Future Shine into a small container that is wide enough for the ornament. Float the ornament into the Future® Shine and push it around a bit with your finger. (After I am done, I use a funnel and pour the extra back into the bottle).

Take the ornament out and blot both sides with a paper towel.

Put the ornament on a piece of wax paper, shape and flatten it and let it remain on the wax paper to dry. (If you use plastic wrap, the beads can stick a bit to the wrap, so it needs to be moved around a bit to prevent this from happening.) If your ornament needs a little extra flattening, use two pieces of wax paper and sandwich your ornament in between; put a book on top of the wax paper for about an hour. Take the book and the top piece of wax paper off the ornament and let dry overnight on the bottom piece of wax paper.


Optional Natural Stiffener

Gather your Supplies

1 TBSP Corn Starch

1 Cup cold water

1 TBSP White Glue

Wax Paper or plastic Wrap

Paper Towel

Old Pan

Tablespoon

Whisk

Something to swish your beadwork around ( I used a plastic fork)

After the snowflake is complete, you can stiffen it. Test first if you use seed beads with dyed or lined colors to make sure this mix to make sure it doesn’t remove the colors.

Start by whisking together 1 Tablespoon of corn starch with 1 cup of cold water in your pan. Heat just to boiling while whisking in 1 TBSP of white glue. Continue whisking until the mixture starts to boil. Take off of the burner and let cool.

Float your snowflake ornament in the mixture and push it around a bit with your plastic spoon (mine is a fork). Leave for a couple of minutes and then stir around one more time before taking it out to dry.

Take the ornament out and blot both sides with a paper towel. Be especially mindful of your crystals that you rub the mixture off.

Put the ornament on a piece of wax paper, shape and flatten it and let it remain on the wax paper to dry. (If you use plastic wrap, the beads can stick a bit to the wrap, so it needs to be moved around a bit to prevent this from happening.) If your ornament needs a little extra flattening, use two pieces of wax paper and sandwich your ornament in between; put a book on top of the wax paper for about an hour. Take the book and the top piece of wax paper off the ornament and let dry overnight on the bottom piece of wax paper.

Thats it!

Clean up is easy too and no lasting odor.

Enjoy your new snowflakes.

Some other ideas for stiffening your snowflakes, I have not tried any of these but they have been suggested by other beaders and bead designers. Worth a try if nothing else is available. My suggestion is to test it first on a small sample of your beadwork.

ProtectaClear, Permalac NT, and Sally Hansen Hard as Nails nail polish (painted on).

Snowflake Ornament #189 Pattern, S0189
http://www.SandraDHalpenny.com
Sandra D. Halpenny © 2023 All rights reserved
Canadian Intellectual Property Office
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows, etc. No mass production of this design is permitted without permission from the author. Patterns tested by: Julia Wentz

Monday, December 18, 2023

Tassel Lace Ornament Pattern

This Pattern is Free here on my Blog.
To Purchase a Downloadable PDF for $1.49
Click HERE

A = Miyuki® 11/0 seed bead, #648, 525*
B = Miyuki® 11/0 seed bead, #1001, 325*
C = 4mm Fire-polished, Light Sapphire AB, 36*
D = 6mm Fire-polished, Light Sapphire AB, 18*

*Bead counts are approximate

R = Round,

Rounds start at the Red dot ●

Please Note: In the illustrations you will see spaces between the beads, this is because the illustrations are flat and the ornament is not. When bead weaving your ornament, do not leave spaces between your beads.

Round 1

Pick up 12A, go with thread forward through the 1st A bead just added in this step.

 


Round 2

a) Pick up 15B, go with thread forward through the A bead that the working thread is exiting, and 2 more A beads in R1.

b) Repeat (a), 5 more time around.

c) Continue with working thread forward through the 1st, 2nd and 3rd A beads added in the first repeat of (a) this R. 


 

Round 3

a) Pick up 1A, go with thread up through the 12th and 11th B beads, R2(a).

b) Pick up 1A, go with thread down through the 5th and 4th B beads in the same repeat, R2(a).

c) Repeat (a & b) around 5 more times.

d) Continue with working thread forward through the 1st A bead added in the first repeat of (a) this R. 


 

Round 4

a) Pick up 4A, go with thread right to left through the 8th B bead, R2(a).

b) Pick up 4A, go with thread right to left through the 1 A bead, R3(a).

c) Pick up 12A, go with thread forward through the 2nd, 3rd and 4th A beads added in this Round at (b), the 1 A bead, R3(a), and the 1st, 2nd and 3rd A beads just added in this step.

d) Pick up 1A, go with thread right to left through the 8th B bead in the next repeat, R2(a).

e) Repeat (b, c & d) around 4 more times.

Repeat (b) 1 time. Continue forward with working thread through the 1st, 2nd and 3rd A beads added in this Round at (a).

f) Pick up 9A, go with thread forward through the 2nd, 3rd and 4th A beads added in the last repeat of (b), this Round, right to left through the 1 A bead, R3(a), and forward through the 4 A beads added in this Round at (a).


Round 5


a) Pick up 1B, go with thread forward through the 1st A bead, R4(b), and the 12th, 11th and 10th A beads, R4(c).

b) Pick up 1B, go with thread forward through the 6th, 5th and 4th A beads, R4(c), and the 1 A bead, R4(d).

c) Repeat (a & b) around 5 more times.

d) Continue with working thread forward through the 1 B bead added in the first repeat of (a), this Round.



Round 6

a) Pick up 4B, go with thread up through the 9th A bead, R4(c or f).

b) Pick up 1B, 1A, 1B, go with thread down through the 7th A bead, R4(c or f).

c) Pick up 4B, go with thread forward through the 1 A bead, R5(a), and up through the 4th and 3rd B beads just added in this step..

d) Pick up 2B, go with thread up through the 9th A bead, R4(d or a).

e) Repeat (b, c &d) around 4 more times. Repeat (b), 1 time.

f) Pick up 2B, go with thread down through the 2nd and 1st B beads added in this Round at (a), the 1 A bead, R4(a), up and forward through the 4 B beads, this R(a), forward through the 9th A bead, R4(c), and the 1st B and 1st A beads added in the first repeat of (b) this Round.



Round 7

a) Pick up 15A, go with thread right to left through the 1 B bead, R6(b), and forward through the 1st through 5th A beads just added in this step.

b) Pick up 5B, 5A, go with thread forward through the next 1 B bead, R6(b).

c) Pick up 10A, go with thread forward through the 5 A beads, this R at (b), the 1 B bead, R6(b) and the 1st through 5th A beads just added in this step.

d) Repeat (b & c) around 4 more times.

e) Pick up 5B, go with thread down through the 11th and 12th A beads added in (a), this R.



Round 8

a) Pick up 2B, go with thread up through the 4th and 5th A beads, R7(a or c) and forward through the 1st and 2nd A beads, R7(b or e).

b) Pick up 8B, 1C, 6B, 1C, 1D, 1B, go with thread up through the 1 D, 1 C, 6 B, 1 C and the 8th through 2nd B beads just added in this step.

c) Pick up 1B, go with thread forward through the 4th and 5th B beads, R7(b or e) and down through the 11th and 12th B beads, R7(c or a).

d) Repeat (a, b & c) around 5 more times.

e) Continue by following the purple dotted line in illustration through with working thread, coming out with thread left to right through the 8th A bead, R7(a).

 



Round 9

This Round is worked clockwise

a) Pick up 10A, 1C, 8A, 1C, 1D, 1A, go with thread up through the 1 D, 1 C, 8 A, 1 C and the 10th through 2nd A beads just added in this step.

b) Pick up 1A, go with thread down through the 10th and 11th A beads, R7(a or c), and the 5th A bead, R7(b).

c) Pick up 5A, go with thread up through the 5th and 6th A beads, R7(a or c).

d) Pick up 10A, 1C, 8A, 1C, 1D, 1A, go with thread up through the 1 D, 1 C, 8 A, 1 C, 9 A beads just added in this step.

e) Pick up 1A, go with thread down through the 8th A bead, R7(a or c).

d) Repeat (a, b, c, d & e) around 5 more times.

Weave the working thread into the ornament and end.

 
 
 
 
 
Tassel Lace Ornament Pattern, O0138
Sandra D. Halpenny © 2008 - 2024 All rights reserved
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows. No mass production of this design is permitted without permission from the author.
 
 
 

 

Wednesday, May 31, 2023

Double St. Petersburg Chain Bead stitch - Learn how



Last time I showed you how to do the St Petersburg Chain.  Now that you have mastered that stitch, the Double St. Petersburg Chain should be easy to learn. *Please note in the illustrations the C bead is drawn as a drop bead, but in the finished sample I used seed beads instead. You can use either bead.


Start by waxing and stretching your thread, use Nymo D or C-Lon & a #11 or #12 beading needle. Tie in a "stopper" bead, leaving about an 8" tail and begin at step #1.

Looking for more patterns? Check out my Etsy store!



1. Follow the instructions to make the St Petersburg Chain Bead stitch pattern. This piece will be called the Base Section in the future steps.








2. Start a new working thread with a stopper bead and go with working thread up through the 1st B bead added in the Base Section piece in step #1.
Pick up 6A, go with thread up through the 3rd and 4th A beads just added in this step.




 3. Pick up 1C, go with thread down through the 4th, 3rd and 2nd A bead, step #2, up through the B bead in the Base Section, step #3, and the 6th and 5th A beads, step #2.







4. Pick up 4A, go with thread up through the 1st and 2nd A beads just added in this step. Make sure to pull up thread so that the 1st A bead added in this step is snug and next to the 5th A bead, step #2.









5. Pick up 1C, go with thread down through the 2nd and 1st A beads, step #4, up through the 1 B bead, added in the Base Section, step #6 or step #9, and the 4th and 3rd A beads, step #4.



6.  Continue by repeating steps #4 and #5 until you reach the end.
That’s it, Happy Beading!


Double St. Petersburg Chain Stitch _ Learn How

http://www.SandraDHalpenny.com
Sandra D. Halpenny 2014 - 2015 All rights reserved
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows, etc. No mass production of this design is permitted without permission from the author.










Winter Ice Necklace/Bracelet Pattern

Princess Hearts Necklace pattern

Crystal Show Necklace Pattern


More Bead Weaving Patterns